Soldering Melting Machine Welding Torch Jewelry Repairing Processing Melting Kit

Specification:

Model: 6 pumps

Power: 30W

Temperature: 2000°C

Voltage: 220V

Flame: 70mm

Application scope: Suitable for modern jewelry factories, gold and silver processing, and dental tools

Working principle:

Precautions:

1. It is strictly prohibited to add oxygen, hydrogen, acetylene, coal gas or biogas to the gasification drum.

2. According to work requirements, the amount of single-use gasoline shall not exceed 0.4 liters.  The maximum amount of third-tier refueling is 0.4 liters.  The maximum refueling capacity for the fourth gear is 0.5 liters, and for the sixth gear, it is 0.5 liters. However, add an adequate amount of gasoline and do not leave it for a long time, such as without moving it all day or overnight.

3. When adding gasoline, be careful to pour it into the fuel filler hole. Waste fuel should be poured out through the fuel filler hole and must not seep into the engine body to avoid damaging the components.

4. When no flame is produced after repeatedly adjusting the "flame control" and the control key, an appropriate amount of gasoline should be added.

5. This machine should not operate for more than 6 hours. If it needs to work for a long time, the two machines should be used alternately to avoid overloading and damage to the components.

6. When the newly added flame is not concentrated and turns red, you can appropriately adjust the "Flame Regulation" to generate the flame that satisfies you.