Jewelry Rolling Mill 4 in 1 Machine for Pressing Gold Silver Copper Metal Tool

Important Notice Before Use:

• Ensure that the upper roller is in a level position before use. If you find that the upper roller is tilted, you can adjust it by manually rotating it through the left and right gears on the top to bring it back to a horizontal position. Uneven pressing can result if not restored to a horizontal position. (The T-bar needs to be removed to operate the gears)
• Some parts do not need to be over-tightened, keep a certain amount of looseness to form a cushion, which is conducive to the protection of the machine.
• Place the item to be pressed between the two rollers and use the T-bar to adjust the distance between the upper and lower rollers, remembering that the two rollers must hold the item to be pressed tightly for normal use.
• The rolling process should be carried out slowly, do not roll too thick at one time, gradually reduce the roll spacing and roll several times until the desired size material is obtained. The gears inside the machine are made of metal blocks of different sizes in series, and rolling too thick a metal material at once can result in too much pressure on the blocks, which can damage them.

Uses

• Making sheet, square wire, 1/2 round wire, round wire
• Patterning metal
• Triangular metal-solder one end and feed through. Cut off the soldered end when done
• Tapering wire

Things to pattern with

• Screening, Metal mesh
• Paper cutouts, Paper, Cardstock
• Fabric-lace, etc.
• Etched plates
• Other patterned materials

Important Notice After Use:

• Wipe and clean the adherents or pressure marks on the top of the rollers after use, so that they can be used again. The longer an attachment or indentation remains on the roller, the more difficult it is to clean, so please clean it promptly.