Electric Sauna Heaters Dry Steam Bath Sauna Stove for Home Hotel Spa Sauna Room

Note: Sauna stones are NOT INCLUDED.  The ample stone capacity allows the stones to absorb and store heat, ensuring effective heat retention and dispersion.

External Control 6KW

Description:

✿PRACTICAL PERSONAL✿: The control system also has a signal device that displays when the meter and temperature regulator are turned on.Depending on the size of the sauna room, after 30-60 minutes, the sauna stove can reach the set temperature, and the thermostat can ensure that the sauna room maintains an even and comfortable temperature. The machine is easy to install and can be placed in a sauna room by adjusting the leg support frame.

✿MULTIPLE FUNCTION✿: Suitable for medium and small bathroom. The sauna furnace is made of high temperature resistant zinc and magnesium plate with built-in control system placed on the right or left side of the furnace body.Install the sauna stove to the wall by yourself with the equipped screw; the stove can also be installed with the lowest height of 1900 mm The wall behind the stove shall not be covered with cement, board or similar material.

✿HIGH QUALITY & INTELLIGENT✿: Install the sauna stove to the wall by yourself with the equipped screw; the stove can also be installed with the lowest height of 1900 mm The wall behind the stove shall not be covered with cement, board or similar material. Because the cladding will cause the wall material to exceed the allowable temperature limit; Qualified materials should be selected for the wall and ceiling.

✿EASY OPERATION✿: Connection of power cord: 1. Connection of power cord shall be completed by professional electrician with current specifications. Use REVE rubber insulated cable (or similar) to connect to the main power source of the furnace;The connection box of the stove is equipped with a terminal and the section of the connection wire is the same as the power wire of the sauna stove.

✿STORAGE✿: Sauna stones may contain dust, so it is recommended that they be washed before being placed in the stone bin. The largest stones should be placed at the bottom, not too tight, leaving room for ventilation. Stones must be replaced when they begin to peel to avoid damaging the sauna stove. Stones are usually 3-8 centimeters in diameter.Temperature control: thermostat can control the temperature at the ideal state.

Specification:

Item Type: Sauna Stove

Material: Stainless Steel

Power: 6KW

Use Space: 5-9m / 16.4-29.5ft

Furnace Tube Voltage: 220-380V

Suitable for: Apartments, hotels, indoor swimming pools, saunas, sweat rooms, fitness centers and other commercial facilities.

Lateral Minimum Distance: Approx. 10cm / 3.9in

Above 500mm Shelf on the Ground Minimum Distance: Approx. 15cm / 5.9in

Suspended Ceiling Minimum Distance: Approx. 110cm / 43.3in

Ground Minimum Distance: Approx. 18cm / 7.1in

Size: Approx. 57 x 41 x 28cm / 22.4 x 16 x 11in

External Control Device Size: Approx. 24.5 x 22 x 8cm / 9.6 x 8.7 x 3.1in

Weight: Approx. 10750g / 379oz

Package List:

1 x Sauna Stove

1 x External Control Device

Note:

1. The power switch is the main power switch of the sauna stove.

2. Note that the upper screw should be tightened properly, leaving a 3mm between the screw head and the wall.

Place sauna stone:

After installing the sauna stove and controller, place an appropriate amount of sauna stone (10-15kg) on the sauna stove.

Note: sauna furnace internal temperature is very high, must use quality sauna stone, temperature difference stone. After heating and watering in the furnace, it is easy to burst and damage the electric heat pipe, or easily oxidize and hinder the heat circulation of the furnace, thus causing damage to the sauna furnace

Installation of temperature sensor:

1. Carefully remove the cover on the of the circuit board of the temperature sensor with a small screwdriver.

2. Fix the circuit board of the temperature sensor directly above the sauna stove with screws.

3. Put the cover on the circuit board of the temperature sensor.