750W Gem Polishing Grinding Machine 5in1 Jewelry Lapidary Saw for Cutting Rocks

Power: 750W

Voltage: 220V

Color: White+Yellow+Blue

Speed: 0-10000rpm

Blade Size: 15cm/6in

Style: ‎Angled

Plug: AU-Standard

Surface Treatment: Plastic Spraying

Material: ‎Metal+Plastic

Saw blade size: 6in

Flexible Shaft Clamp Size: 4mm/0.157in

Drill Chuck Range: 10mm/0.4in

Cutting Depth: 3.5cm

Polishing wheel diameter: 75mm

Polishing mandrel thread: 8mm

Speed change method: stepless

Speed change series: Polishing cutting

Installation Required: Yes

Weight: 6kg/13.2lbs

Table Size(L*W): 29*20cm/10.43*8.66in

Product Size(L*W*H): 29*20*213cm

Package Included:

1*Table Grinder

1*Basket

1*Flexible Shaft

1*Flexible Shaft Handle

2*Saw Blades

1*English Manual

All Accessories for Assembly

Notice:

1. Please note this tool should be grounded while in use.

2. Please always wear proper eye and face protection devices such as safety glasses and face shields(not included). Please do not wear loose clothing or jewelry. Please tie back your long hair.  

3. Before use, please check each attachment for cracks or defects, and do not use any damaged, loose, vibrating or unbalanced accessories, or any attachments that are higher than the maximum rated speed of the machine.          

4. Please always insert the shank or arbor of an accessory or mandrel into the collect(or collet holder chuck or chuck arbor) as far as possible to provide proper support. Please tighten the collet or chuck securely.

Please do not use excessive side pressures which may tend to bend or break the shank or arbor or an accessory. Let the speed of the accessory do the work.

5. Please do not install the motor by jamming or using excessive pressure on the polishing wheel, buff, wheel, or other accessories. This can result in damage to the motor.

6. Please do not operate your power tool during a perceptible power decreases. Please turn the power tool off and do not use it until power is fully restored.

7. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.