Introduction

【Pure sine Wave Inverter】10200W Pure sine Wave Inverter is a new all-in-one hybrid solar inverter charger, Support dual PV input, dual MPPT voltage tracking.RGB lingthing for different working mode(Purple-PV Mode;Red-Battery Mode;Blue-Utility Mode)
【TECHNICAL SPECIFICATIONS】10.2KW Hybrid Solar Inverter Max.PV Input Power: 10200W, Voltage range: 90-450Vdc, Max.PV Input VOC: 500V DC, Starting voltage >150V; The best working voltage is 300-360V;Recommended PV cable size: 10AWG, Max. charge current: 180A. Nominal Input Frequency: 50/60Hz; Output Power: 10200W, surge Capacity: 20400W.fit for 48V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery
【MULTIPLE CHARGING MODES】Off Grid Solar Inverter have 4 charging modes are optional, i.e. Only Solar, Mains Frist , Solar Frist and Mains & Solar hybrid charging; and 3 output modes are available, i.e. Solar Frist, Mains Frist and SBU Priority, uninterrupted power supply to meet different application requirements. And compatible to mains voltage or generator power, Auto restart while AC is recovering.
【New features】Built-in BMS function. Lithium Battery Activation， has a reactivation feature to awaken a sleeping lithium battery. The small charge current to activate the protection circuit and if a correct cell voltage can be reached, it starts a normal charge.Dual AC output, one for the main load (UPS function), one for the conventional load.
【WIDE RANGE OF USES】MPPT Inverter Charger Pure sine Wave 10200W for RV Camping Boat Home Emergency ect.. Can be accessed to a variety of household and office loads, including Oven, rice cooker, lamps, televisions, fans and other AC loads.（Be careful not to install it near the bedroom, the fan will make a sound when the inverter is running. Avoid affecting your rest)
Note: After item 37 is set to "hyd", item 01 will jump back to SUB mode instead of SBU mode.

Feature

1.Pure sine wave solar inverter

2.Built-in 160A(for 7.2KW/8.2KW)/180A(for 10.2KW)MPPT solar charge

3.Inverter running without batter

4.Smart battery charge design to optimize battery life

5.Output power factor 1.0

6.One-click restoration to factory Settings

7.High PV input voltage range(90~500VDC）

8.Dual output

9.WIFI&GPRS available for IOS and Android

10.Built-in Lithium battery automatic activation

11.Built-in anti-dusk kit for harsh environment

12.Touch buttom

Product Data Sheet
MODEL	VICTOR MAX-10.2KW
Phase	1-phase
Maximum PV Input Power	5400W+5400W
Rated Output Power	10200W/10200VA
Maximum Solar Charging Current	160A
GRID-TIE OPERATION
PV INPUT(DC)
Nominal DC Voltage/Maximum DC Voltage	360/500VDC
Start-up Voltage/Initial Feeding Voltage	90VDC/120VDC
MPPT Voltage Range	90-450VDC
Maximum Input Current	2/18A
GRID OUTPUT(AC)
Nominal Output Voltage	220/230/240VAC
Output Voltage Range	195-253VAC
Nominal Output Current	44.3A
Power Factor	>0.99
EFFICIENCY
Maximum Conversion Efficiency(DC/AC)	98%
TWO LOAD OUTPUT POWER
Full Load	10200W
Maximum Main Load	10200W
Second Load Range	2040W-7140W
Maximum Load Cut Off Voltage	52VDC
Maximum Load Return Voltage	54VDC
OFF-GRID OPERATION
AC INPUT
AC Start-up Voltage/Auto Restart Voltage	120-140VAC/180VAC
Acceptable Input Voltage Range	90-280VAC or 170-280VAC

10.2KW On/Off Grid Solar Hybrid Inverter 160A Charge Controller PV Max 500V